This is a rectangular glass aquarium with a 55-gallon (approx. 208-liter) capacity, designed for both beginners and experienced hobbyists looking for a large tank that comes with basic equipment included. Technical specifications and features—Capacity: 55 gallons.
Recommended use: Freshwater community fish, aquatic plants, or entry-level saltwater setups.
GUARANTEED ANALYSIS:
Crude Protein 28.0% min
Crude Fat 3.5% min
Crude Fiber 2.0% max
Moisture 7.0% max
INGREDIENTS:
GUARANTEED ANALYSIS:
Crude Protein 31.0% min
Crude Fat 5.0% min
Crude Fiber 2.0% max
Moisture 7.0% max
Phosphorus 1.1% min
Ascorbic Acid 100 mg/kg min
INGREDIENTS:
Corn Flour, Fish Meal, Wheat Starch, Dehulled Sorbean Meal, Feeding Oat Meal, Wheat Gluten, Wheat Germ Meal, Potato Protein, Monobasic Calcium Phosphate, Soybean Oil, Yeast Extract, Ascorbic Acid, Riboflavin 5 Phosphate, Inositol, Niacin, A-Tocopherol Acetate, L-Ascorbyl 2 Polyphosphate, D-Calcium Pantothenate, Thiamine Mononitrate, Vitamin A Palmitate, Biotin Vitamin B12 Supplement, Cholecalciferol, Manganese Sulfate Monohydrate, Zinc Sulfate Monohydrate, Ferrous Sulfate Monohydrate, Cobalt Acetate
GUARANTEED ANALYSIS:
Crude Protein 31.0% min
Crude Fat 5.0% min
Crude Fiber 2.0% max
Moisture 7.0% max
Phosphorus 1.1% min
Ascorbic Acid 100 mg/kg min
INGREDIENTS:
Corn Flour, Fish Meal, Wheat Starch, Dehulled Sorbean Meal, Feeding Oat Meal, Wheat Gluten, Wheat Germ Meal, Potato Protein, Monobasic Calcium Phosphate, Soybean Oil, Yeast Extract, Ascorbic Acid, Riboflavin 5 Phosphate, Inositol, Niacin, A-Tocopherol Acetate, L-Ascorbyl 2 Polyphosphate, D-Calcium Pantothenate, Thiamine Mononitrate, Vitamin A Palmitate, Biotin Vitamin B12 Supplement, Cholecalciferol, Manganese Sulfate Monohydrate, Zinc Sulfate Monohydrate, Ferrous Sulfate Monohydrate, Cobalt Acetate
All Tetra HT heaters have indicator lights to let you know when the heater is on. It will be red when heating and green when the proper temperature has been reached..All Tetra HT Heaters will shut off if an electrical short is detected for your safety.
All Tetra HT heaters have indicator lights to let you know when the heater is on. It will be red when heating and green when the proper temperature has been reached..All Tetra HT Heaters will shut off if an electrical short is detected for your safety.
The HT10 uses a built in electronic theromstat to automatically maintain water at 78° F which is ideal for most tropical fish. No adjustment is requried.
Ideal for aquariums between 2 to 10 gallons with hoods or glass canopies
The HT heater is fully submersbile and can be installed vertically or horizontally. It’s small footprint makes it easy to conceal behind plants or other décor.
Please read all label information upon delivery.
DO NOT plug heater into an electrical outlet until it is placed inside the aquarium.
Removes green algae in pond water fast. Tetra® AlgaeControl™ effectively combats algae blooms (green water), string and hair algae (Spirogyra) and blanket weed (Oedogonium).
For use with, when used as directed: Ornamental ponds with plants, Ornamental ponds with ornamental fish and fountains.
Keep your tank healthy. Maintaining a healthy, safe aquarium environment for your fish is important, and regularly testing your water levels in the aquarium is critical to success. EasyStrips™ are a perfect solution.
By quickly testing for all water quality issues in your aquarium water, EasyStrips provide accurate results with minimal effort, and have the most advanced technology in water testing because they’re designed from the same medical and scientific laboratory technology. A healthy aquatic environment starts with clean water, so be sure to use EasyStrips to promote a vibrant aquarium
This makes them effective for placing smaller pieces of rock together when creating a larger structure. This adhesive can also be used in conjunction with a small amount of mortar or epoxy when a slightly larger gap between rocks needs to be filled. Fluid adhesives like this work well for close bonds between surfaces and are also suitable for fixing some types of coral, such as zoanthid mats.
This makes them effective for placing smaller pieces of rock together when creating a larger structure. This adhesive can also be used in conjunction with a small amount of mortar or epoxy when a slightly larger gap between rocks needs to be filled. Fluid adhesives like this work well for close bonds between surfaces and are also suitable for fixing some types of coral, such as zoanthid mats.
TIP: New membranes will have a thin protective coating until they are ready for use. It is recommended to discard all water produced by the new membrane during the first hour of operation.
For the product data sheet, click here.
DuPont Filmtec 100 GPD TW30-1812-100HR Membrane Specifications:
100 gallons per day
ANSI/NSF 58 certified for material safety.
Dimensions: 1.83″ wide x 11.75″ long
Stabilized salt rejection (%): 98.0
Permeate flow rate* gpd at 50 psi: 100
Features:
150 gallons per day
Operates at as low as 65 psi
The TFC (thin film composite) membrane is used with non-chlorinated water.
Vacuum tested and individually sanitized
NSF-58 certified
Features of the Value Plus Water Saver 4-Stage RO/DI System:
Dual-line TDS meter | Flush kit | Glycerin-filled pressure gauge
Produces 0 TDS water
Multi-source water connections
Mur-lok push-fit EPDM double O-ring fittings
10 feet of each of 1/4″ tubing in blue, red, and black
Pre-installed NSF-certified filters
Specifications and Benefits of the BRS Jumbo Ozone Air Dryer:
Silica gel beads are easily recharged by baking them in an oven.
Maximize ozone generator performance
Extend the life of the ozone generator
Dimensions: 9″ W x 18″ H x 9″ D
The convenient cartridge holds 3 lbs of media, resulting in fewer changes.
Serrated fittings for 3/16″ ID tubing
Hot-swappable filter cartridge for air dryers. Includes 1.3 kg of filter and has a 1.3 kg capacity.
Save time and simplify dryer maintenance.
BRS chlorine and VOC carbon blocks are manufactured using high-performance carbon combined with a new bonding system technology that maximizes microspore volume and surface area for enhanced performance. The combination of advanced carbon technology, a higher carbon volume in each filter, and proprietary manufacturing processes delivers exceptionally high performance in terms of chlorine, VOCs, and overall chemical removal.
Chlorine 15,000 at 1 GPM**
High chemical adsorption*
30% more carbon than standard blocks***
VOC reduction
Exceptionally low pressure drop
*Nominal micron rating for all above: 1 micron
**2 ppm free chlorine >90% reduction
***Manufacturer’s internal testing data
BRS Universal Carbon Blocks have been specially formulated for industry-leading chloramine and chlorine reduction, making them the highest-performing and longest-lasting carbon block in our industry.
Chlorine 35,000 to 1 GPM*
Chloramines 3,500 to 0.5 GPM*
NSF Certified Materials
New: BRS Universal Carbon Blocks were developed to be the best industrial solution for chloramines, chlorine, and well water, simplifying filter selection for everyone. The new block represents the latest in carbon technology by increasing surface area, carbon volume, and catalytic sites within the carbon pore network.
BRS Universal Carbon Blocks are manufactured with high-performance catalytic activated carbon, combined with a new binder system technology that maximizes the availability of critical catalytic sites. The combination of advanced carbon technology, a higher carbon volume in each filter, and patented manufacturing processes delivers exceptionally high performance in terms of chloramine, chlorine, VOCs, and general chemical removal.
Compatible with all BRS systems as well as all competitor systems using a standard 10″ filter.
Specifically formulated for superior chloramine reduction. Nominal filtration of 1 µm (micron)*
Chlorine 35,000 at 1 GPM**
Chloramines 3,500 at 0.5 GPM***
High chemical adsorption
30% more carbon than standard blocks****
*Nominal micron rating for all values above: 1 micron
**2 ppm free chlorine >90% reduction
***3 ppm monochloramine >85% reduction
Silica gel beads for Ozone Air Dryers. Starts blue and turns pink when saturated. Bake in oven at at 300° F for 3 hours to recharge to blue. 1.5lbs DI Air Dryer Media (Desiccant).
Reverse osmosis systems can remove up to 99% of contaminants from water; however, they can never remove 100%, which is the general goal for reef aquarium water. This is where deionization (DI) resin comes in, acting as the final «filter» in a RODI system after the membrane.
DI resin carries an ionic charge, either cation (+) or anion (-), to exchange hydrogen or hydroxide molecules for contaminants such as phosphate, silica, nitrate, sulfate, aluminum, iron, calcium, etc., allowing you to achieve 0 TDS water in your aquarium and eliminate potential water quality issues.
You may not know that there are several types of DI resin, from mixed-bed resins to single-bed resins, which you can use depending on the specific goal for your water and the water content after the reverse osmosis membrane.
Reverse osmosis systems can remove up to 99% of contaminants from water; however, they can never remove 100%, which is the general goal for reef aquarium water. This is where deionization (DI) resin comes in, acting as the final «filter» in a RODI system after the membrane.
DI resin carries an ionic charge, either cation (+) or anion (-), to exchange hydrogen or hydroxide molecules for contaminants such as phosphate, silica, nitrate, sulfate, aluminum, iron, calcium, etc., allowing you to achieve 0 TDS water in your aquarium and eliminate potential water quality issues.
You may not know that there are several types of DI resin, from mixed-bed resins to single-bed resins, which you can use depending on the specific goal for your water and the water content after the reverse osmosis membrane.
Reverse osmosis systems can remove up to 99% of contaminants from water; however, they can never remove 100%, which is the general goal for reef aquarium water.
This is where deionization resin (DI) comes in, acting as the final «filter» in a RODI system after the membrane.
DI resin has an ionic charge, either as a cation (+) or anion (-), to exchange hydrogen or hydroxide molecules for contaminants such as phosphate, silica, nitrate, sulfate, aluminum, iron, calcium, etc., allowing you to obtain TDS 0 water for your aquarium and helping to eliminate any potential water quality problems.
Reverse osmosis systems can remove up to 99% of contaminants from water; however, they can never remove 100%, which is the general goal for reef aquarium water.
This is where deionization resin (DI) comes in, acting as the final «filter» in a RODI system after the membrane.
DI resin has an ionic charge, either as a cation (+) or anion (-), to exchange hydrogen or hydroxide molecules for contaminants such as phosphate, silica, nitrate, sulfate, aluminum, iron, calcium, etc., allowing you to obtain TDS 0 water for your aquarium and helping to eliminate any potential water quality problems.
Color-Changing Mixed-Bed DI Resin
DI resin begins to deplete when exposed to air. To prevent this, all DI resin is packaged in 4mm Mylar bags with an aluminum lining to prevent exposure to air, which could deplete the resin while awaiting use. The resin can remain packaged this way for 2 years without losing its capacity. Bulk DI bags are perfect for those who process large volumes of water or consume resin quickly. The bags can be resealed using a zip-top closure. Please note that this closure will not be as effective as the original, so it is recommended only for those who require a large volume of DI resin. Otherwise, purchase individual refill packs for optimal freshness for up to two years.
Color-Changing Mixed-Bed DI Resin
DI resin begins to deplete when exposed to air. To prevent this, all DI resin is packaged in 4mm Mylar bags with an aluminum lining to prevent exposure to air, which could deplete the resin while awaiting use. The resin can remain packaged this way for 2 years without losing its capacity. Bulk DI bags are perfect for those who process large volumes of water or consume resin quickly. The bags can be resealed using a zip-top closure. Please note that this closure will not be as effective as the original, so it is recommended only for those who require a large volume of DI resin. Otherwise, purchase individual refill packs for optimal freshness for up to two years.
DI resin begins to deplete upon exposure to air. To prevent this, we package all DI resin in 4mm Mylar bags with an aluminum lining that prevents exposure to air, which could deplete the resin while awaiting use. The resin can be stored packaged this way for up to two years without losing its potency. Our bulk DI resin bags are perfect for those who process large quantities of water or consume resin quickly. The bags can be resealed with a zip-top closure. Please note that this closure will not be as effective as the original, so we recommend them only for those who require a large volume of DI resin. Otherwise, purchase individual refill packs for optimal freshness for up to two years.
